Home / Accessories / Pumps / Turblo+
DYNAMIC

Turblo+

NEW

Compact electric pump, no more manual pumping

Meet the Turblo+: our compact powerhouse pump, built for riders who demand performance. The high-precision pressure sensor and auto-stop function ensure your tires are inflated to the exact pressure you set, then shut oA automatically. Always the right pressure, with zero effort and maximum control. Store up to four preset pressures to switch between bikes or front and rear setups in seconds. The Trublo+ is fast, exact, and built to perform. Use the Turblo+ at home, before your race, or throw it in your bike bag for your next training camp. The Turblo+ delivers; anytime, anywhere.

Inside the Turblo+, a powerful 57W motor delivers strong, consistent airflow. Built from full metal and equipped with a carbon push rod, it’s made for maximum durability and performance. Powered by a 2000 mAh battery and easy to charge via USB-C. Thanks to its smart design, the Turblo+ fits right into your backpack, bike bag or carry-on.

Secret features of the Turblo+
The Turblo+ can also be used as a power bank. Plug in a USB-A cable and recharge your phone or other device; perfect for training camps and travel!

FEATURES

Sensor  Digital pressure sensor + auto-stop
Weight 451 g 
Product Dimensions 6.8 x 4.8 x 154 mm
Inflate 10.0 bar / 145 psi
Battery

High-tech Li-Po battery (2000mAh 2S)
Runtime

Up to 25 minutes
Max power 57 W
Inflation Speed 22 L/min
Inflation capacity (full charge)

Up to 10 road tires 28mm (5.0 bar / 73 PSI)

Up to 18 MTB tires 29” (1.5 bar / 22 PSI)

Charge

USB-C
Certifications CE, UKCA and RCM
Warranty 2 years

 

 

T379X00

ACCESSOIRES

  1. Turblo+
  2. Schrader valve air hose
  3. Presta nozzle
  4. Ball needle
  5. USB-C charging cable
  6. Storage bag
  7. User manual 

USE CASE

1. Press and hold the power button for 3 seconds to turn on the Turblo+.

2. Use the mode buttons [ < > ] to select one of the four modes.

  • Bike 1, Bike 2, Bike 3: The bike modes let you store your preferred pressures for different bikes or tires.
  • The manual mode can be used for other inflatables, such as car tires and sports balls.
  • Change pressure units (bar or PSI) by holding the
  • light button.

3. Set your desired pressure using the [ + ] and [ - ] buttons. The selected pressure appears next to the battery icon.

  • NOTE: Always check the recommended air pressure for the item being inflated. Do not over-inflate or under-inflate, as this can cause injury or damage.

4. Connect the pump to the valve. Different nozzles are included. Determine which nozzle you need (Schrader or Presta) and connect it to the air hose of the Turblo+. The ball needle (included) can be screwed into the hose for inflating sports balls.

5. Check the real-time pressure on the digital display’s top line (in bar or PSI).

6. Press the power button to start inflating. The Turblo+ automatically stops when your preset pressure is reached

7. Disconnect the Turblo+ from the valve.

8. Turn off the Turblo+ by holding the power button. Let it to cool before storing.