BARKEEPER PRO TUBELESS SEALANT

The Pro formula uses an optimal viscosity to enable fast and even distribution of the sealant around the tyre. This results in instant sealing effectivity as the sealant is always immediately present at the site of a puncture.

• 1 L
• Cutting-edge Hi-Fibre synthetic latex formula 
• Seals punctures up to 8mm
• 100% carbon safe, ammonia free, hypo allergenic non-corrosive
• Compatible with all tubeless wheels and tyres
• Works with CO2 cartridges
• Seals 6mm punctures in less than 0,5s!
• Adviced amount per tyre: Road: 30-45 ml. | MTB 26" 650B, Cross 700c: 60-75ml. | MTB 29": 100-149ml. | Downhill: 120-140ml.

​APPLICATION

Shake the bottle to ensure an even distribution of Hi-Tec Fibre particles. Mount your tyre onto the rim and initially inflate without sealant until the tyre pops into place. Deflate the tyre and remove the valve core. Inject the desired amount of sealant through the de-cored valve. Reinsert the valve core and reinflate the tire to the desired pressure. Go for a short ride to distribute the sealant around the inside of your tyre and rim.

The sealant does not need to be replaced regularly. However, it is recommended to check every few months if there is still enough sealant in the tire. This can vary depending on how often you ride and your conditions.

Ver esta publicación en Instagram

Una publicación compartida de Dynamic Bike Care (@dynamicbikecare)