Barkeeper Tubeless Tape

Barkeeper Tubeless Tape is the perfect foundation for your performance tubeless set-up.Available in 6 different sizes.The glue has been specifically developed to increase its strength under pressure providing the ultimate seal when the tire is inflated. When time comes to remove the tape, you can do so residue free. To select the right width of tape, add 2-4mm to the internal width of your wheels.

• 11 metres
• Available in 6 different sizes
• Easy to apply
• Hi-Tec cross-fibre structure
• Lightweight and super strong
• Residue free glue, which strengthens under pressure

APPLICATION

Ensure the rim bed is free from glue residue and grease by using a preparation spray like Perfect Prep. Select the right width tape by adding 2-4mm to the internal width of your wheels. Start laying the tape on the opposite side of the valve hole from where you are facing the wheel. Lay a minimum of one full rotation ending on the other side of valve hole, thus overlapping the valve hole. Cut the tape at a 45º angle. Apply the sealing patch over the end of the tape for added security. Lastly use a heated round pick to poke a small hole in the tape over the valve hole, for the tubeless valve to fit through.

PRO TIPS:

• Degrease the rim before application
• Cut the tape diagonally to prevent the tape from lifting
• Overlap the tape at the valve
• Use a heated pick to poke the hole for the valve